92% polyester/8% elastane
Shrinkage max. 2%.The product is certified to retain its qualities with 50 domestic washes.
Wash according to ISO 6330. Wash together with like colours/textiles.
Wash gently < 40ºC.
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Clarify between local legislation and chemical supplier.
Close any zippers before washing.
Fluorescent and with reflective tapes. Has a water-repellent finish. Two-toned. Ultimate stretch fabric that is lightweight and durable. Double stitched seams on leg and crotch. Ergonomically formed trouser leg. Detachable holster pockets. Press stud fastening on innermost hanging tool pocket. Holster pocket with lined phone pocket and magnet fastening. Holster pockets with Kevlar® and CORDURA® fabric reinforcements. Belt loops. Tool strap at both sides of waist. Fastening with two way zip and storm flap. Front pockets. Back pockets with reinforcement and flaps. Hidden tool straps on both sides. Button (detachable) for attaching knife holder. Ruler pocket with Kevlar® reinforcement. Pockets with flaps on thighs. Kneepad pockets in CORDURA ® two-way stretch fabric with ventilation. Simple individual adjustment of kneepad pocket height. Thigh pocket with lined phone pocket, magnet fastening and integrated ID card holder. Detachable ID card holder. Vertical zip to allow for ventilation on back thigh. Phone chest pocket with flap. Adjustable shoulder straps with hook and loop band. Ventilation in the back. With print effects. Each standard leg length can be lengthened by 3 cm by releasing the internal red stitches. We recommend 00718-100, 00418-100, 50454-916 & 20118-915 kneepads for this model. Co-certified together with kneepad type SHORT or LONG in accordance with EN 14404.
The product is certified with maximum 0,2200m² logo area. This approved area must not be exceeded. Logo on, respectively, front or back of the product can constitute only a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
No liability accepted for product alterations.