MASCOT® ACCELERATE
Winter Clothing
Face masks
Sustainable products
Sustainable profile
100% polyester
210 g/m²
Ripstop.The product is certified to retain its qualities with 50 domestic washes.
Description
Domestic process.
Pro Label
No.
Wash process
Wash according to ISO 6330. Wash together with like colours/textiles.
Wash temperature
Machine wash max 60ºC.
Wash chemistry
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
Reflective garments
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Disinfection
Clarify between local legislation and chemical supplier.
Drying process
Hang dry.
Zippers
Close any zippers before washing.
Fluorescent and with oblique, transverse reflective strips. Breathable, wind and waterproof. Taped seams. Lining of quilt. The waistband is higher at the back, to better protect against the cold. Belt loops. D-ring. Fly with zip. Front pockets. Back pockets with reinforcement, flap and hidden press studs. Reinforced thigh pocket with additional pockets; an inner phone pocket as well as an external phone pocket with flap and magnetic closure. Ruler pocket. Adjustable knee pad pockets with flap and top access. Snow flap on the inside of leg. Zip with storm flap on outerside of legs. We recommend 00718-100, 00418-100, 50454-916 & 20118-915 kneepads for this model. Co-certified together with kneepad type SHORT or LONG in accordance with EN 14404.
The product is certified with maximum 0,4500m² logo area. This approved area must not be exceeded. Logo on, respectively, front or back of the product can constitute only a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement:
No liability accepted for product alterations.